AUTONICS TK4L-T4CR

Description

AUTONICS TK4L-T4CR
Tổng Quan

Thông số kỹ thuật TK4L-T4CR

Mã sản phẩm: TK4L-T4CR

Chữ số: 9999(4digit)

Kích thước: W96xH96 mm

Đầu vào/ đầu ra lựa chọn: Alarm1+RS485 Giao tiếp

Nguồn cấp: 100-240VAC 50/60Hz

Đầu ra điều khiển 1 : Có thể lựa chọn đầu ra hiện tại hoặc đầu ra ổ SSR

Đầu ra điều khiển 2: Sưởi& làm mát: Relay

AUTONICS TK4L-T4CR

Bộ điều khiển nhiệt độ Autonics TK4L-T4CR 96x96mm

  • Phương pháp hiển thị : LED 7 đoạn 4 số
  • Phương thức điều khiển : Điều khiển ON / OFF, P, PI, PD, điều khiển PID
  • Loại ngõ vào : Thermocouple: K(CA), J(IC), E(CR), T(CC), B(PR), R(PR), S(PR), N(NN), C(TT), G(TT), L(IC), U(CC), Platinel II
    RTD: DPt100Ω, DPt50Ω, JPt100Ω, Cu100Ω, Cu50Ω, Nikel 120Ω
    Analog: 0-100mV, 0-5V, 1-5V, 0-10V
    0-20mA, 4-20mA
  • Chu kỳ lấy mẫu : 50ms
  • Ngõ ra điều khiển 1 : Dòng điện (DC0 / 4-20mA) hoặc SSR (11VDC) [ON / OFF]
  • Ngõ ra tùy chọn : Cảnh báo 1, Truyền thông RS485
  • Nguồn cấp : 100-240VAC~ 50/60Hz
  • Cấu trúc bảo vệ : IP65(bảng điều khiển phía trước
Phương pháp hiển thị LED 7 đoạn 4 số
Phương thức điều khiển Điều khiển ON / OFF, P, PI, PD, điều khiển PID
Loại ngõ vào Thermocouple: K(CA), J(IC), E(CR), T(CC), B(PR), R(PR), S(PR), N(NN), C(TT), G(TT), L(IC), U(CC), Platinel II
RTD: DPt100Ω, DPt50Ω, JPt100Ω, Cu100Ω, Cu50Ω, Nikel 120Ω
Analog: 0-100mV, 0-5V, 1-5V, 0-10V
0-20mA, 4-20mA
Chu kỳ lấy mẫu 50ms
Ngõ ra điều khiển 1 Dòng điện (DC0 / 4-20mA) hoặc SSR (11VDC) [ON / OFF]
Ngõ ra điều khiển 2 Relay(250VAC~ 3A)
Ngõ vào tùy chọn CT, Số (DI-1)
Ngõ ra tùy chọn Cảnh báo 1, Truyền thông RS485
Nguồn cấp 100-240VAC~ 50/60Hz
Cấu trúc bảo vệ IP65(bảng điều khiển phía trước)
Độ chính xác hiển thị_RTD •Ở nhiệt độ phòng(23℃±5℃):(PV ±0.3% or ±1℃, chọn mức cao hơn) ±1 chữ số
•Ngoài nhiệt độ phòng:(PV ±0.5% or ±2℃, chọn mức cao hơn) ±1 chữ số
Độ chính xác hiển thị_TC •Ở nhiệt độ phòng(23℃±5℃):(PV ±0.3% or ±1℃, chọn mức cao hơn) ±1 chữ số
•Ngoài nhiệt độ phòng:(PV ±0.5% or ±2℃, chọn mức cao hơn) ±1 chữ số
Độ chính xác hiển thị_Analog •Ở nhiệt độ phòng(23℃±5℃): ±0.3% F.S. ±1 chữ số
•Ngoài nhiệt độ phòng: ±0.5℃% F.S. ±1 chữ số
Độ chính xác hiển thị_Ngõ vào CT ± 5% F.S. ± 1 chữ số
Độ trễ RTD/Thermocouples: 1 đến 100℃/℉(0.1 đến 100.0℃/℉) biến analog: 1 đến 100 chữ số
Dải tỷ lệ 0.1 đến 999.9℃/℉(0.1 đến 999.9%)
Thời gian tích phân 0 đến 9999 giây
Thời gian phát sinh 0 đến 9999 giây
Thời gian điều khiển Ngõ ra relay, Ngõ ra điều khiển SSR: 0.1 đến 120.0 giây Ngõ ra dòng hoặc Ngõ ra điều khiển SSR tùy chọn: 1.0 đến 120.0 giây
Cài đặt lại bằng tay 0.0 đến 100.0%
Nhiệt độ xung quanh -10 đến 50℃, bảo quản: -20 đến 60℃
Độ ẩm xung quanh 35 đến 85%RH, bảo quản : 35 đến 85%RH
Loại cách điện Cách điện kép hoặc cách điện gia cố (ký hiệu: @(INS), độ bền điện môi giữa phần ngõ vào đo và phần nguồn: 2kV)
Trọng lượng Xấp xỉ 294g(Xấp xỉ 198g)
Tiêu chuẩn Tieu-chuan-CETieu-chuan-CULUS

 

 

TK4-Huong-dan-chon-ma

 

 

Thông số kỹ thuật

 

Series TK4N TK4SP TK4S TK4M TK4W TK4H TK4L
Power supply AC voltage 100-240VAC 50/60Hz
AC/DC voltage 24VAC 50/60Hz, 24-48VDC
Allowable voltage range 90 to 110% of rated voltage
Power consumption AC voltage Max. 6VA Max. 8VA
AC/DC voltage Max. 8VA (24VAC 50/60Hz), max. 5W (24-48VDC)
Display method 7-segment (PV: red, SV: green), other display part (green, yellow, red) LED method
Character size PV (W×H) 4.5×7.2mm 7.0×14.0mm 9.5×20.0mm 8.5×17.0mm 7.0×14.6mm 11.0×22.0mm
SV (W×H) 3.5×5.8mm 5.0×10.0mm 7.5×15.0mm 6.0×12.0mm 6.0×12.0mm 7.0×14.0mm
Input type RTD JPt 100Ω, DPt 100Ω, DPt 50Ω, Cu 100Ω, Cu 50Ω, Nikel 120Ω (6 types)
Thermcouple K, J, E, T, L, N, U, R, S, B, C, G, PLII (13 types)
Analog Voltage: 0-100mVDC , 0-5VDC , 1-5VDC , 0-10VDC (4 types) ·Current: 0-20mA, 4-20mA (2 types)
Display accuracy RTD ·At room temperature (23℃ ±5℃): (PV ±0.3% or ±1℃, select the higher one) ±1-digit※1 ·Out of room temperature ranges: (PV ±0.5% or ±2℃, select the higher one) ±1-digit In case of TK4SP Series, ±1℃ will be added.
Thermcouple
Analog ·At room temperature (23℃ ±5℃): ±0.3% F.S. ±1-digit ·Out of room temperature ranges: ±0.5% F.S. ±1-digit
CT input ±5% F.S. ±1-digit
Control output Relay OUT1, OUT2: 250VAC 3A 1a
SSR Max. 11VDC ±2V 20mA
Current DC4-20mA or DC0-20mA selectable (resistance load: max. 500Ω)
Alarm output Relay AL1, AL2: 250VAC 3A 1a ※TK4N AL2: 250VAC 0.5A, 1a (max. 125VA), TK4SP has only AL1
Option output Transmission DC4-20mA (resistance load: max. 500Ω, output accuracy: ±0.3% F.S.)
Communication RS485 communication output (Modbus RTU)
Option input CT 0.0-50.0A (primary heater current reading range) ※CT ratio is 1/1000 (except TK4SP)
Digital input ·Contact input: ON – max. 2kΩ, OFF – min. 90kΩ ·Non-contact input: ON – residual votage max. 1.0VDC , OFF – leakage current max. 0.1mA ·Outflow current: approx. 0.5mA per input ※TK4S/M: 1 (TK4S-D : 2, TK4SP: none), TK4N/H/W/L: 2 (except TK4SP)
Control method Heating, Cooling ON/OFF, P, PI, PD, PID control mode
Heating&Cooling
Hysteresis ·RTD/Thermcouples: 1 to 100℃/℉ (0.1 to 100.0℃/℉) variable ·Analog: 1 to 100-digit
Proportional band (P) 0.1 to 999.9℃/℉ (0.1 to 999.9%)
Integral time (I) 0 to 9999 sec
Derivative time (D) 0 to 9999 sec
Control period (T) ·Relay output, SSR drive output: 0.1 to 120.0 sec ·Current output+SSR drive output: 1.0 to 120.0 sec
Manual reset value 0.0 to 100.0%
Sampling period 50ms
Dielectric strength 2,000VAC 50/60Hz for 1 min (between power source terminal and input terminal)
Vibration 0.75mm amplitude at frequency of 5 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours
Relay life cycle Mechanical OUT1/OUT2: min. 5,000,000 operations, ·AL1/AL2: min. 20,000,000 operations (TK4H/W/L: min. 5,000,000 operations)
Electrical OUT1/OUT2, AL1/AL2: min. 100,000 operations
Insulation resistance Over 100MΩ (at 500VDC megger)
Noise immunity Square shaped noise by noise simulator (pulse width 1㎲) ±2kV R-phase, S-phase
Memory retention Approx. 10 years (non-volatile semiconductor memory type)
Environ -ment Ambient temp -10 to 50℃, storage: -20 to 60℃
Ambient hum 35 to 85%RH, storage: 35 to 85%RH
Protection IP65 (front panel) ※TK4SP: IP50 (front panel)
nsulation type Double insulation or reinforced insulation (mark: , dielectric strength between the measuring input part and the power part : 2kV)
Weight※2 Approx. 140g
(approx. 70g)
Approx. 130g (approx. 85g) Approx. 150g (approx. 105g) Approx. 210g (approx. 140g) Approx. 211g (approx. 141g) Approx. 294g (approx. 198g)

 

Mô tả sản phẩm

TK4-Mo-ta-san-pham

 

TK4-Bang-kich-thuoc

 

Đại lý AUTONICS vietnam, AUTONICS viet nam, AUTONICS vietnam distributor, Phân phối AUTONICS tại việt nam

Đại lý AUTONICS vietnam, AUTONICS viet nam, AUTONICS vietnam distributor, Phân phối AUTONICS tại việt nam

Đại lý AUTONICS vietnam, AUTONICS viet nam, AUTONICS vietnam distributor, Phân phối AUTONICS tại việt nam

Đại lý AUTONICS vietnam, AUTONICS viet nam, AUTONICS vietnam distributor, Phân phối AUTONICS tại việt nam

Đại lý AUTONICS vietnam, AUTONICS viet nam, AUTONICS vietnam distributor, Phân phối AUTONICS tại việt nam

 

 

Reviews

There are no reviews yet.

Be the first to review “AUTONICS TK4L-T4CR”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *