Description

BALDOR MFE230A003B

MicroFlex e100 AC Servo Drive 3 Amp continuous, 105-230VAC 50/60Hz

Universal Encoder Interface, supporting:
– SSI single and multi-turn absolute encoders
– BiSS single and multiturn absolute encoders
– EnDat absolute encoders (v2.1 and v2.2)
– Incremental encoders (with Hall effect sensors). 5V differential signals.
– Hall sensor only for DC trapezoidal control
– 1V Peak – Peak Sin/Cos analog encoders with onboard interpolation
Additional devices supported by Feedback Option Cards
– Resolver with simulated encoder output
– Incremental encoders (with Hall effect sensors). 5V differential signals. Simulated encoder output.
Refer to technical manual for full description of supported encoder types and manufacturer part numbers

Integrated IGBT output. An external regen resistor can be fitted if required

DC bus over-voltage; DC bus under-voltage; Phase-Loss; Peak over-current; Motor short circuit; Over-temperature; I2T over current,
hardware dead-time protection, motor thermal trip input, network failure modes.

H: 180 mm (7.09″) W: 79.6 mm (3.13″) L: 157 mm (6.18″). Weight 1.5 Kg (3.3 lbs.)

Temperature range 0˚C to 45˚C (32˚F to 113˚C) with derating to 55˚C