Description
PANASONIC NA40-14
Đặc điểm chung của Cảm biến vùng khoảng cách giữa các tia 40mm PANASONIC NA40 series
Cảm biến vùng khoảng cách giữa các tia 40mm PANASONIC dòng NA40:
– Phạm vi cảm biến: 5 m (16.404 ft).
– Khoảng cách các tia: 40 mm (1.575 in).
– Đối tượng cảm biến: ø60 mm (ø2.362 in) hoặc hơn đối với đối tượng không trong suốt.
– Điện áp cung cấp: 12 đến 24 V DC ± 10%.
Thông số kỹ thuật chung của Cảm biến vùng khoảng cách giữa các tia 40mm PANASONIC NA40 series
| Loại | Area Sensors |
| Phương pháp phát hiện | Through-beam (Full set) |
| Khoảng cách phát hiện | 5m |
| Chiều cao bảo vệ | 120mm, 200mm, 280mm, 360mm, 440mm, 520mm, 600mm, 760mm, 920mm |
| Số trục quang học | 4, 6, 8, 10, 12, 14, 16, 20, 24 |
| Bước trục quang học | 40mm |
| Kích thước vật phát hiện tiêu chuẩn | D60mm |
| Vật phát hiện tiêu chuẩn | Opaque |
| Nguồn cấp | 12…24VDC |
| Ngõ ra | NPN |
| Chế độ hoạt động | Light On |
| Nguồn sáng | Infrared LED (synchronized scanning system) |
| Chức năng bảo vệ | Reverse polarity protection, Short-circuit protection |
| Chức năng | Mutual interference prevention |
| Thời gian phản hồi | 12ms |
| Chất liệu vỏ | Aluminum |
| Kiểu kết nối | Pre-wire connetor |
| Chiều dài cáp | 0.5m |
| Phương pháp lắp đặt | Top / bottom bracket |
| Môi trường hoạt động | Standard, Spatter-resistance |
| Ánh sáng môi trường | Incandescent light: 3.500 lx or less at the light-receiving face |
| Nhiệt độ môi trường | -10…50°C |
| Độ ẩm môi trường | 35…85% |
| Khối lượng tương đối | 400g, 500g, 630g, 770g, 890g, 1.02kg, 1.15kg, 1.4kg, 1.66kg, 500g, 630g, 800g, 990g, 1.15kg, 1.33kg, 1.5kg, 1.84kg, 2.19kg |
| Chiều rộng tổng thể | 30mm |
| Chiều cao tổng thể | 180mm, 250mm, 330mm, 410mm, 490mm, 570mm, 650mm, 810mm, 970mm |
| Chiều sâu tổng thể | 25.5mm, 50mm |
| Cấp bảo vệ | IP65 |
| Tiêu chuẩn áp dụng | IEC |
| Phụ kiện đi kèm | Mounting bracket: MS-NA40-1 |
| Phụ kiện bán rời | End cap emitter: NA40-ECP, End cap receiver: NA40-ECD, End unit emitter: NA40-2EUP, End unit emitter: NA40-4EUP, End unit receiver: NA40-2EUD, End unit receiver: NA40-4EUD, Front cover: FC-NA40-4, Large indicator for area sensor: SF-IND, Main unit emitter: NA40-MUP, Main unit receiver: NA40-MUD, Mating cables: NA40-CC3, Mating cables: NA40-CC7, Protection enclosure: MC-NA40-4, Sensor mounting bracket: MS-NA40-1, Slit mask: OS-NA40-4, Sub-unit emitter: NA40-4SUP, Sub-unit receiver: NA40-4SUD, Front cover: FC-NA40-6, Protection enclosure: MC-NA40-6, Slit mask: OS-NA40-6, Front cover: FC-NA40-8, Protection enclosure: MC-NA40-8, Slit mask: OS-NA40-8, Front cover: FC-NA40-10, Protection enclosure: MC-NA40-10, Slit mask: OS-NA40-10, Front cover: FC-NA40-12, Protection enclosure: MC-NA40-12, Slit mask: OS-NA40-12, Front cover: FC-NA40-14, Protection enclosure: MC-NA40-14, Slit mask: OS-NA40-14, Front cover: FC-NA40-16, Protection enclosure: MC-NA40-16, Slit mask: OS-NA40-16, Front cover: FC-NA40-20, Protection enclosure: MC-NA40-20, Slit mask: OS-NA40-20, Front cover: FC-NA40-24, Protection enclosure: MC-NA40-24, Slit mask: OS-NA40-24, Protection enclosure: MC-NA40-4H, Protection enclosure: MC-NA40-6H, Protection enclosure: MC-NA40-8H, Protection enclosure: MC-NA40-10H, Protection enclosure: MC-NA40-12H, Protection enclosure: MC-NA40-14H, Protection enclosure: MC-NA40-16H, Protection enclosure: MC-NA40-20H, Protection enclosure: MC-NA40-24H |
NA40-14 | 40 mm Beam Pitch General Purpose Area Sensor NA40
Spec Detail As of September 29, 2023
| Item | Specifications |
|---|---|
| Product Number | NA40-14 |
| Part Number | NA40-14 |
| Sensing height | 520 mm 20.472 in |
| Sensing range | 5 m 16.404 ft |
| Beam pitch | 40 mm 1.575 in |
| Sensing object | ø60 mm ø2.362 in or more opaque object |
| Supply voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Current consumption | Emitter: 35 mA or less Receiver: 90 mA or less |
| Sensing output | NPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between sensing output and 0 V) • Residual voltage: 1.6 V or less (at 100 mA sink current) |
| Sensing output:Output operation | ON when all beam channels are received / OFF when one or more beam channels are interrupted |
| Sensing output:Short-circuit protection | Incorporated |
| Self-diagnosis output | NPN open-collector transistor • Maximum sink current: 50 mA • Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V) • Residual voltage: 1.6 V or less (at 50 mA sink current) |
| Self-diagnosis output:Output operation | OFF when unstable light received condition continues for 5 sec. or more, or the output transistor fails |
| Self-diagnosis output:Short-circuit protection | Incorporated |
| Response time | 12 ms or less |
| Indicator | Incorporated with the three color indicators on the receiver • Sensing output operation indicator: Red LED (lights up when one or more beam channels are interrupted) • Stable incident beam indicator: Green LED (lights up when all beam channels are received stably) • Unstable incident beam indicator: Yellow LED (lights up when one or more beam channels are received unstably) * When the output transistor fails, the three color indicators blink simultaneously. |
| Interference prevention function | Incorporated (Two units of sensors can be mounted close together.) |
| Protection | IP65 (IEC) |
| Ambient temperature | –10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: –10 to +60 ℃ +14 to +140 ℉ |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient illuminance | Incandescent light: 3,500 ℓx or less at the light-receiving face |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation resistance | 20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each |
| Shock resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each |
| Emitting element | Infrared LED (synchronized scanning system) |
| Material | Protection enclosure: Aluminum Unit case: ABS Front cover: Acrylic Lens: Acrylic |
| Cable | 0.5 mm2 4-core (emitter: 3-core) cabtyre cable, 0.5 m 1.640 ft long, with a round connector at the end * Use together with the optional mating cable |
| Cable extension | Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.5 mm2, or more, cable. (However, the interference prevention wire can extend up to 20 m 65.617 ft between two emitters.) |
| Weight(Total weight of emitter and receiver) | 1,020 g approx. |
| Accessories | MS-NA40-1 (Sensor mounting bracket): 1 set for emitter and receiver Adjusting screwdriver: 1 pc. |
Đại lý Panasonic vietnam, Panasonic viet nam, Panasonic vietnam distributor, Phân phối Panasonic tại việt nam
Đại lý Panasonic vietnam, Panasonic viet nam, Panasonic vietnam distributor, Phân phối Panasonic tại việt nam
Đại lý Panasonic vietnam, Panasonic viet nam, Panasonic vietnam distributor, Phân phối Panasonic tại việt nam
Đại lý Panasonic vietnam, Panasonic viet nam, Panasonic vietnam distributor, Phân phối Panasonic tại việt nam
Đại lý Panasonic vietnam, Panasonic viet nam, Panasonic vietnam distributor, Phân phối Panasonic tại việt nam
Reviews
There are no reviews yet.